Description
100A Solar Charge Controller by Victron Energy
TR VE Can MPPT controller
A 100A solar charge controller that gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged. This 100A charge controller works well with all types of Canbat batteries including Lithium Iron Phosphate, Sealed Lead Acid and Lead Carbon.
Key Features & Benefits
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when the temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
Day/night timing and light dimming option
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
VE.Can: the multiple controller solution
Up to 25 units can be synchronized with VE.Can
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display
Want to learn more about the Victron SmartSolar 100A charge controller? Click here
William C. –
Connected a Victron energy 100A solar charge controller to my solar panels along with my other Victron equipments. The result was great, I got around 30% more out of my panels, It’s not causing any damages to my batteries. The app is great addition to it, I can now check all the information on the charging. WOW!!
David S. –
A bit pricey but with it, you can fully configure the exact float and bulk absorption. Better than the cheap ones out there. I got a Victron 100A solar charge controller for my RV and it was a major improvement over my other old cheap one I had. Worth every penny.
Richard A. –
I couldn’t figure out the bluetooth thing. For some reason it wasn’t able to connect to my android phone. I updated the firmware and still didn’t work. I reset the whole thing and still nothing. Thankfully Canbat helped me out in this one and they quickly resolved the situation; hats off for them.
Charles D. –
This Victron energy solar charge controller got so many things in it. A Bluetooth Smart built-in, preprogrammed algorithms, MPPT, temperature sensor, and it’s smart enough to manage your batteries. It’s fast, it’s fluid, it’s efficient, and it doesn’t bring harm to your batteries, Looking forward to getting another one again.
Joseph L –
The MPPT 100A solar charge controller is great. Loving the fact that it has Bluetooth inside and you can connect your smartphone to it to check the charging information. You can also add a pluggable display to it which is optional. All the features that comes with are great.
Thomas C. –
The Victron Solar charge is good and all, liking the the built in Bluetooth feature that it comes with. But, if you wanna have a wired connection to your PC other devices , you need Color Control GX, other GX products which is sold separately. I am using the Bluetooth option and it works perfectly well but I would preferred to have a wired connection. Putting that aside, the Victron 100A solar charge controller is an amazing product. So far, I haven’t had any problems with it yet.
Christopher A. –
I am very thrilled to have the 100A Victron energy solar charge controller. Ever since I set it up with my solar panels, it’s been working perfectly well. Glad I have made the right choice getting this rather than those cheap knock off ones.
Daniel G. –
I have been using a couple of these Victron Solar charge controllers for years, and not once they have let me down. It’s safe and reliable, no complications or any hitches at all.